Five habits that keep a cold chain predictable

Cold chain · 18 Mar 2026 · 5 min read

Five habits that keep a cold chain predictable

Temperature excursions rarely start at the sensor. They start in the hand-off between two teams that each thought the other was watching.

A cold chain is only as strong as its least documented hand-off. In the shipments we review, most excursions trace back to a gap in responsibility rather than a refrigeration failure.

1. One temperature record per consignment

If the warehouse keeps one log and the carrier keeps another, you have two half-truths. Bind both to the same consignment record so the excursion window can be located precisely.

2. Pre-cool the vehicle, not just the trailer setting

Loading into a box that has been at ambient for two hours defeats a set-point of 4°C. Confirm the pre-cool in the loading checklist.

3. Agree the excursion threshold in writing

Two degrees for twenty minutes is a different conversation from two degrees for two hours. Decide the acceptable envelope before the first load moves.

4. Put the sensor where the risk is

Door-side pallets see every opening. Place at least one probe near the doors and one in the centre of the load.

5. Review exceptions weekly, not quarterly

A five-minute weekly review of flagged trips catches a failing unit before it costs a customer.

Written by Marta Keller. Sample editorial content for this template.